Degradable double screw extruder runs normally, and it is necessary to adjust the screw and engine properly, as well as the temperature. The temperature should not be too high, which causes plastic melting, nor too low, which can damage the machine parts.
When double screw extruder starts running, the low-speed gear should be opened to check for abnormal noise and current load of the ammeter. Check the pressure gauge to ensure that everything is normal, and prevent the machine from running at high speed for a long time to avoid damage to the machine parts.
Preparations must be done before starting the double screw extruder. The raw materials used in the extrusion process must meet certain drying requirements. If they do not meet the application standards, the drying measures must be taken.
Depending on the model and specification of the machine, the installation process should be strictly followed. Install the compressed air duct in the machine, install the heater bar and engine heating coil of the core mold, and check the software of the tap water system. Adjust the space dimensions of the mold port and other areas to ensure even clearance. It is necessary to ensure that both ends are aligned with the axis of the server machine and the boiler auxiliary machine.
After producing with the degradable double screw extruder, clean the plastic extruded from the machine, turn off the power switch of the machine, including the power switch of the machine box and the boiler auxiliary switch. Then dismantle the inner structure of the machine and clean every part. After cleaning, apply a certain amount of motor oil to the parts and carry out maintenance.
After cleaning and maintenance, install the machine. The cleaning and maintenance of double screw extruder is an important process in the whole process. Reliable cleaning and maintenance can increase the service life of the machine, and ensure normal operation in the next application process.
Nanjing KY Chemical Machinery Co., Ltd. not only provides customers with first-class quality extruders, but also helps customers optimize their entire production system. From material storage, drying, transport, measurement, mixing to final product packaging, we have a factory-level intelligent control system to provide customers with a set of high-reliability and cost-effective solutions. Welcome to consult us.
Tel: +86-25-52706155
E-mail: info@kymach.com
No.59 West Tianyuan Road, Jiangning, Nanjing, Jiangsu Province, China
English 
日本語 
한국어 
français 
Español 
русский 
português 
العربية 
中文
